PicoScope 7 Software
Available on Windows, Mac and Linux
Hardware problem?
Hardware problem?
Suddenly, without apparent reason, picoscope started reading half of the voltage across all channels. Plus there is a random offset (10-40mv) on some channels. What may be the reason? How this can be solved?
Re: Hardware problem?
Hi prishvin,
Could you give us the details of exactly what you are measuring, and post a psdata file.
Also, has the output impedance of what you are measuring changed? For instance, if you are capturing a signal from an external Signal Generator and it's output is changed to drive a 50 ohm input, when it was previously set to drive a high impedance input, the voltage will be halved.
Regards,
Gerry
Could you give us the details of exactly what you are measuring, and post a psdata file.
Also, has the output impedance of what you are measuring changed? For instance, if you are capturing a signal from an external Signal Generator and it's output is changed to drive a 50 ohm input, when it was previously set to drive a high impedance input, the voltage will be halved.
Regards,
Gerry
Gerry
Technical Specialist
Technical Specialist