problem in generation of phase difference measurement csv file

Post discussions on applications you are writing
Post Reply
sanee
Newbie
Posts: 0
Joined: Wed Mar 13, 2019 6:26 am

problem in generation of phase difference measurement csv file

Post by sanee »

we have used a math channel for the phase difference measurement of two channel that is given into your forum i.e.
((((atan(1/tan(pi*(B/10000)))/pi)+(B/10000))*-((atan(1/tan(pi*(C/10000)))/pi)+(C/10000)))+0.25)/0.002777777 * (((atan(1/tan(pi*T))/pi)+T)*2)
and we are using DC average from the measurement for phase shift measurement.But when we generate excel (.csv) file of that DC average measurement then in that .csv file it only shows either 180 degree or 0 degree not the DC average value. So how we can generate that measurement file of phase difference of two signals in .csv format from this pico scope ?
Top
Gerry
PICO STAFF
PICO STAFF
Posts: 836
Joined: Mon Aug 11, 2014 11:14 am

Re: problem in generation of phase difference measurement csv file

Post by Gerry »

Hi Sanee,

I have sent you a response to your Support Ticket for the same question.

Regards,

Gerry
Gerry
Technical Specialist
Top
Post Reply

Return to “Applications”