Channel B using voltage reference of channel A when exported

Forum for discussing PicoScope (version 5)
Post Reply
aseman
User
User
Posts: 5
Joined: Wed Jan 24, 2007 12:22 pm

Channel B using voltage reference of channel A when exported

Post by aseman » Thu Apr 03, 2008 4:16 pm

Hi. I am having problem with exporting the data as text to excel. The voltage recorded on channel B seems to be based on the scaled used on channel A. If channel A is in Volts and channel B is in mV range, the data exported will display channel A and B in mV but using channel A as reference?

Can anyone help how to correct this or is there any setting to adjust?
Attachments
WHY.JPG
(124.54 KiB) Downloaded 348 times
10khz.psd
(88.22 KiB) Downloaded 350 times

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Thu Apr 10, 2008 11:02 am

Hi,

You will need to right click and drag for the second channel.

Hope this helps.
Ziko

Technical Specialist

aseman
User
User
Posts: 5
Joined: Wed Jan 24, 2007 12:22 pm

Post by aseman » Thu Apr 10, 2008 2:03 pm

Thanks a lot. I guess this kind of trick should be published on special help file. The current help file is too basic.

Post Reply