How to log all active channels with Alarm trigger

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
bboyes
Newbie
Posts: 0
Joined: Tue Dec 25, 2018 2:20 pm

How to log all active channels with Alarm trigger

Post by bboyes »

Hi, I've been setting up a test case to capture and log to disk using alarms. But I am finding that only the trigger channel (not all active channels) get logged! I have a 4-channel 3425 and want to log ALL the channels at every trigger event. How can I do this?

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: How to log all active channels with Alarm trigger

Post by Gerry »

Hi bboyes,

Here is an example PS3425 psdata file with the alarm setup to capture and automatically save to disk all active channels (not just the trigger channel). I've set it up to restart the capture so that it automatically continues, but if you don't want that behaviour, then just remove the last action (Restart Capture) from the list in 'Alarms'.

multichannel alarm automated capture.psdata
(239.34 KiB) Downloaded 343 times
Regards,

Gerry
Gerry
Technical Specialist

Post Reply