SBC / NUC

Which product is right for your exact requirements
Post Reply
JCD
User
User
Posts: 3
Joined: Sat Dec 22, 2012 1:06 pm

SBC / NUC

Post by JCD » Fri Jan 25, 2019 8:18 pm

Hi,
I would like to replace my parallel port ADC-11/12 and buy a Picolog 1216.
The laptop with parallel port is getting old and unreliable and I want to replace it as well.
Preferably with a Single Board Computer or a NUC.
Is there any brand/type/flavor you would recommend or advise against?
A fanless sollution would be the nicest.
Cheers,
Jean

JCD
User
User
Posts: 3
Joined: Sat Dec 22, 2012 1:06 pm

Re: SBC / NUC

Post by JCD » Mon Feb 04, 2019 11:19 am

I can see here Picolog on Raspberry pi3 that support for Raspberry pi will be feature request for Picolog 6.
Is Picolog 6 meanwhile supported on Raspberri Pi?

Martyn
Site Admin
Site Admin
Posts: 3507
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SBC / NUC

Post by Martyn » Mon Feb 04, 2019 11:41 am

It is not currently supported but is being actively looked into, I suggest emailing support@picotech.com to log your interest.
Martyn
Technical Support Manager

JCD
User
User
Posts: 3
Joined: Sat Dec 22, 2012 1:06 pm

Re: SBC / NUC

Post by JCD » Wed Feb 06, 2019 4:07 pm

Martyn wrote:
Mon Feb 04, 2019 11:41 am
It is not currently supported but is being actively looked into, I suggest emailing support@picotech.com to log your interest.
Just did it :wink:

Post Reply