5243A Block Modes Not Working

Post your LabVIEW discussions here
Post Reply
Howdie91
Newbie
Posts: 0
Joined: Thu May 31, 2018 9:09 pm

5243A Block Modes Not Working

Post by Howdie91 » Thu Jan 17, 2019 10:36 pm

A few months ago AndrewA helped me with setting up the streaming mode on the 5243A. It involved downloading the 5000D SDK. I am trying to rebuild some of my older code that used the 5000A SDK and I cannot get it to work.

I've attached an example code, but I'm unsure how reproducible this is. Basically, the program opens a connection, makes it through settings, but inside any of the PS5000A block VIs the ps5000aIsReady while loop get stuck and I'm not really sure why. Also attached is a screenshot of this happening.

My streaming code still works, but I need to do an accuracy comparison between the two and I'm not sure how to fix this. Any help would be appreciated.
Attachments
Pico Not Working Rapid Block.vi
(13.72 KiB) Downloaded 55 times
PICO Forum Image Rapid Block Not Working.PNG

Martyn
Site Admin
Site Admin
Posts: 3575
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 5243A Block Modes Not Working

Post by Martyn » Mon Jan 28, 2019 10:37 am

I would suggest emailing this issue to support@picotech.com and AndrewA will be able to assist you.
Martyn
Technical Support Manager

Post Reply