3206D

Post any questions you may have about our current range of oscilloscopes
Post Reply
vkprabhala
Newbie
Posts: 0
Joined: Wed Jan 16, 2019 6:46 pm

3206D

Post by vkprabhala » Wed Jan 16, 2019 6:54 pm

My 3206D with Linux library works. But, at unit power up, I usually get error 325. From the error list in the header file, I traced it to PICO_INTERNAL_ERROR. Why is this happening? I'm using Pico supplied USB 3.0 cable to a USB 3.0 USB port on my CPU board.

vkprabhala
Newbie
Posts: 0
Joined: Wed Jan 16, 2019 6:46 pm

Re: 3206D

Post by vkprabhala » Fri Jan 18, 2019 1:46 pm

I see that no one in the community probably encountered this problem. Can someone from Picotech support pick it up please? It's kind of urgent I resolve this problem or abandon entirely. Thanks!

Martyn
Site Admin
Site Admin
Posts: 3467
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 3206D

Post by Martyn » Fri Jan 18, 2019 1:50 pm

Please email support@picotech.com to discuss this
Martyn
Technical Support Manager

vkprabhala
Newbie
Posts: 0
Joined: Wed Jan 16, 2019 6:46 pm

Re: 3206D

Post by vkprabhala » Fri Jan 18, 2019 10:22 pm

Hi Martyn,
Thanks for the reply. I sent the e-mail to support@picotech.com

Post Reply