ADC-42, obtaining data with a date and timestamp

Forum for discussing PicoScope (version 5)
Post Reply
vasu_sh
Newbie
Posts: 1
Joined: Thu Mar 27, 2008 2:27 pm

ADC-42, obtaining data with a date and timestamp

Post by vasu_sh »

Hi! I'm using an ADC-42 to obtain data from my load cell. I get a the following table of data values in my .txt file (using the 'Save As' function in PicoScope:

Channel A
Time Value
(ms) (mV)
2 -302
2 -302
12 -302
22 -302
32 -299
42 -302
52 -299
62 -299
72 -302
82 -299
92 -299

What I would want in addition to this is a date and time stamp on each value. The reason is that there is another software which I'm using to log data from another transducer and I can only compare the data I get from there with the data from PicoScope if I have a timestamp on each data value.

Thanks
Pankaj

picojohn
Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn »

Hello Pankaj,

You may obtain what you require by using the PicoLog application and setting the spreadsheet view to display Date/Time for each value.

Please refer to the PicoLog user manual http://www.picotech.com/document/pdf/plw044.pdf

Regards
John

Post Reply