The new .picolog file format

Post general discussions on using our drivers to write your own software here
Post Reply
kiki
Newbie
Posts: 0
Joined: Tue Oct 30, 2018 1:44 pm

The new .picolog file format

Post by kiki » Tue Oct 30, 2018 2:14 pm

Is the new .picolog file format documented somewhere?
I recorded multiple channels on 24bit pico-logger with various frequencies, and now the exporting tool cannot export the data from the channels with the highest frequency of logging.
At the time of recording, I wasn't aware that there is a limitation which doesn't allow all the data to be exported in such cases. This data is very important and unique, so I need it exported without any limitations.
Most of the channels were recorded each 300ms; only three channels were recorded each 1000ms. I intend to export to .CSV all 300ms channels.

Martyn
Site Admin
Site Admin
Posts: 3635
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: The new .picolog file format

Post by Martyn » Wed Oct 31, 2018 8:53 am

Please email support@picotech.com for assistance
Martyn
Technical Support Manager

Post Reply