For .psdata file saved by PicoScope6 software

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Stone_Mei
Newbie
Posts: 0
Joined: Fri Dec 22, 2017 6:28 am

For .psdata file saved by PicoScope6 software

Post by Stone_Mei »

Hello!

For .psdata file saved by PicoScope6 software,after capture and save I want to handle datas using another software with my special arithmetic,so Could you give some ways to transform .psdata file to another format that I can open and access except for .csv/.txt/.mat,because the max length of .csv/.txt/.mat is limited.

Best Regards
Stone

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: For .psdata file saved by PicoScope6 software

Post by Martyn »

The only supported formats are those you have mentioned. The latest version of the software does not have the restrictions that were present in earlier versions, although you will be warned of large file sizes.
Martyn
Technical Support Manager

Post Reply