TC-08 Compatibility with WT series Thermistor

Post any questions you may have about our current range of USB data loggers
Post Reply
Raji2018
Newbie
Posts: 0
Joined: Fri Oct 05, 2018 2:53 pm

TC-08 Compatibility with WT series Thermistor

Post by Raji2018 » Tue Oct 23, 2018 6:38 am

I am planning to use the USB TC-08 data logger with Omega WTK-8-36-SMPW-M thermistor which is bolt-on mount directly with heat sink. Just want to confirm if the part specification and mating are compatible to use with the Pico data logger.

Thanks for the help!

Martyn
Site Admin
Site Admin
Posts: 3507
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: TC-08 Compatibility with WT series Thermistor

Post by Martyn » Tue Oct 23, 2018 7:42 am

Provided you mean Thermocouple and not Thermistor, and that it comes with a miniature thermocouple connector then yes it will be fine to use.

The only thing to be careful with is to ensure that the mounting is at the same ground potential as the TC08 and PC, or that the actual thermocouple junction tip is electrically isolated from the mounting.
Martyn
Technical Support Manager

Post Reply