PicoScope 7 Software
Available on Windows, Mac and Linux
Code: Select all
Copyright © 2014-2017 Pico Technology Ltd. All rights reserved.
PicoScope 4000 Series MATLAB Instrument Driver
Instrument Device Object Using Driver : picotech_ps4000_generic.mdd
Instrument Information
Type: Oscilloscope
Manufacturer: Pico Technology Ltd.
Model: PicoScope 4000 Series
Driver Information
DriverType: MATLAB generic
DriverName: picotech_ps4000_generic.mdd
DriverVersion: 1.1.12
Communication State
Status: closed
Warning: Disconnect: No devices found.
Error using icdevice (line 316)
An error occurred while executing the driver create code.
No units found.
If the error is not an instrument error, use MIDEDIT to inspect the driver.
Error in PS4000_ID_Block_Example (line 73)
ps4000DeviceObj = icdevice('picotech_ps4000_generic.mdd');
Code: Select all
Copyright © 2014-2017 Pico Technology Ltd. All rights reserved.
PicoScope 4000 Series (A API) MATLAB Instrument Driver
Instrument Device Object Using Driver : picotech_ps4000a_generic.mdd
Instrument Information
Type: Oscilloscope
Manufacturer: Pico Technology Ltd.
Model: PicoScope 4000 Series (A API)
Driver Information
DriverType: MATLAB generic
DriverName: picotech_ps4000a_generic.mdd
DriverVersion: 1.2.12
Communication State
Status: closed
Number of units found: 1
Serial number(s): FT792/193
Opening PicoScope 4000 Series device...
Instrument Device Object Using Driver : picotech_ps4000a_generic.mdd
Instrument Information
Type: Oscilloscope
Manufacturer: Pico Technology Ltd.
Model: PicoScope 4000 Series (A API)
Driver Information
DriverType: MATLAB generic
DriverName: picotech_ps4000a_generic.mdd
DriverVersion: 1.2.12
Communication State
Status: open
Setting Device Parameters...
Default Channel Setup:-
-----------------------
Channel A:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Channel B:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Channel C:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Channel D:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Channel E:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Channel F:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Channel G:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Channel H:-
Enabled: True
Coupling: DC
Range: 5V
Analog Offset: 0.0V
Turning off trigger...
Warning: Escaped character '\M' is not valid. See 'doc sprintf' for supported special characters.
> In privateExecuteMCode>localCleanupError (line 117)
In privateExecuteMCode (line 44)
In instrgate (line 20)
In icdevice/invoke (line 73)
In privateEvaluateCode (line 29)
In instrgate (line 18)
In icdevice/connect>localEvaluateCode (line 130)
In icdevice/connect (line 94)
In PS4000A_ID_Block_Example (line 76)
Error using icdevice/connect (line 114)
An error occurred while executing the driver connect code.
Error: PS4000A_ID_Block_Example (line 76)
connect(ps4000aDeviceObj);
>>