Zero shift

Having problems ? let us know the details here
Post Reply
Oleg
User
User
Posts: 2
Joined: Thu Oct 04, 2018 7:48 am

Zero shift

Post by Oleg » Thu Oct 04, 2018 8:26 am

Hello!
I'm engineer. I am engaged high-voltage equipment measurements.
I have 1 question.
PicoScope 4227 has a zero shift (about 3 mV).
I think that one of labeled elements (see photo) is used to adjust the zero offset.
If so, please indicate which item it is.
Thanks.
Attachments
PicoScope 4227_.jpg

Martyn
Site Admin
Site Admin
Posts: 3504
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Zero shift

Post by Martyn » Fri Oct 05, 2018 1:16 pm

There are no user adjustable parts, you should use the Zero Offset feature within PicoScope 6 for this.
Martyn
Technical Support Manager

Oleg
User
User
Posts: 2
Joined: Thu Oct 04, 2018 7:48 am

Re: Zero shift

Post by Oleg » Fri Oct 05, 2018 1:41 pm

Yes, but Zero settings on PicoScope 6 are valid only during its operation. When restart PicoScope 6, the settings are not saved. That is, the offset again 3 mV.

Post Reply