Encoder A quad B test

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
cbius6
Newbie
Posts: 0
Joined: Wed Jul 11, 2018 3:50 pm

Encoder A quad B test

Post by cbius6 »

Goodmorning
I'm triyng to create a setting for test and display a e b channel for Line Driver Encoder with picoscope 2204A.
I 've to generate an alarm if the voltage of the channels is under +2,5 v or -2,5V.
For generate the alarm probably i should generate a mask with this 2 ranges.
How can i do that?

thanx

bennog
Advanced User
Advanced User
Posts: 206
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Encoder A quad B test

Post by bennog »

Is te motor always running at the same speed ?

Benno

cbius6
Newbie
Posts: 0
Joined: Wed Jul 11, 2018 3:50 pm

Re: Encoder A quad B test

Post by cbius6 »

sorry ,
i rotate the encoder manually ...
i've generated a mask on the max value channel for generate an allarm when the signal is under 2.5 V but the problem is that the mask failed when i start to capture ...

Post Reply