PicoLog CM3 - DateTimeStamp?

Forum for discussing PicoLog
Post Reply
PicoPilot
User
User
Posts: 6
Joined: Tue Apr 19, 2016 5:40 am

PicoLog CM3 - DateTimeStamp?

Post by PicoPilot »

Hi, I'm considering the CM3 to record current (amps) usage every 15 seconds over two weeks. However, I would need the date and time for each sample so I can analyze power usage patterns.

I read another post that seems to indicate a DateTimeStamp is not supported and the samples are simply a sequential data series. Please confirm?

Thanks in advance
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoLog CM3 - DateTimeStamp?

Post by Martyn »

PicoLog 6 software allows you to specify different time formats for the data table and export these to CSV.
Martyn
Technical Support Manager
Top
PicoPilot
User
User
Posts: 6
Joined: Tue Apr 19, 2016 5:40 am

Re: PicoLog CM3 - DateTimeStamp?

Post by PicoPilot »

Thanks, Martyn.

May I suggest that this datetimestamp feature in the PicoLog 6 software be prominently described on the product description page of your website, as well as the CM3 manual. This feature is an important consideration when evaluating data loggers for purchase.
Top
Martyn
Site Admin
Site Admin
Posts: 4499
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoLog CM3 - DateTimeStamp?

Post by Martyn »

Thank you for the feedback :) I will pass the information on to the relevant people
Martyn
Technical Support Manager
Top
Post Reply

Return to “PicoLog”