PicoSample vs PicoScope

Post any questions you may have about our current range of oscilloscopes
Post Reply
Goocha
Newbie
Posts: 1
Joined: Tue Sep 18, 2018 10:16 am

PicoSample vs PicoScope

Post by Goocha » Tue Sep 18, 2018 10:21 am

Hello,
I would like to understand the difference between PicoSample (3.26.0) & PicoScope (6.13.6).
I just bought a 9302-15 and i realized it was not the same software as the others oscillo.

I am on mac. Is there a way to use PicoScope 6 with a 9302-15 ? I didn't find any PicoSample version for mac or Linux.

Thanks

Martyn
Site Admin
Site Admin
Posts: 3376
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoSample vs PicoScope

Post by Martyn » Tue Sep 18, 2018 10:41 am

PicoSample 3 is the software specifically for the 9000 series sampling oscilloscopes, PicoScope 6 is the software for our standard real time oscilloscopes. The operation of these devices is completely different, hence the reason for two independent pieces of software.

We do not have Linux or Mac support for our sampling oscilloscopes at the present time.

If this causes you an issue please email support@picotech.com
Martyn
Technical Support Manager

Goocha
Newbie
Posts: 1
Joined: Tue Sep 18, 2018 10:16 am

Re: PicoSample vs PicoScope

Post by Goocha » Tue Sep 18, 2018 11:00 am

Thank you for your answer.
I just send you an email with different technical questions to be sure a 9000 series oscilloscope can do what i want.

Regards

Post Reply