Pico Software + Serial to USB converter?

Having problems ? let us know the details here
Post Reply

Pico Software + Serial to USB converter?

Post by Guest » Fri Mar 14, 2008 6:01 pm

Does Pico software recognise the device connected to the USB hub using a Serial to USB Converter?.

Keith (Southend)

Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Mon Mar 17, 2008 3:43 pm

Hi yes it does.

If you have one of our serial ported devices then you can certainly use a USB to serial converter. You will need to find out what COM port it has been assigned to in Device manager. So when you are in PicoLog you can assign the corresponding COM port.

Hope this helps.

Technical Specialist

Post Reply