Test and Measurement Forum

pico 3206

Which product is right for your exact requirements

pico 3206

Postby ronnielyon » Mon Mar 10, 2008 5:50 pm

can anybody tell me if the pico 3206 can be used for checking automotive waveforms thanks ronnie
Posts: 1
Joined: Thu Mar 06, 2008 11:52 pm

Postby ziko » Fri Mar 14, 2008 2:23 pm

Hi the 3206 will not work with the automotive software and as such you will not have any of the saved waveforms or automotive menus.

However it is still an oscilloscope so you can probe any of the sensors if you really know what you are doing.

The 3206 is 8 bits vertical resolution whilst the automotive scopes are 12 bits.
One other thing that the 3206 does not have and that is the +/-50V input, it goes to a maximum of +/-20V. Also the automtive scopes have a little more proetection than standrads scopes we sell.

Hope this helps.

Technical Specialist
Zen Master
Zen Master
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests