CSV export includes blank lines

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
pedro3
Newbie
Posts: 0
Joined: Mon Sep 10, 2018 2:26 pm

CSV export includes blank lines

Post by pedro3 »

I was using Picolo 6.1.2 yesterday, with four thermocouples on the TC08, all set to capture one reading every 10 minutes. On exporting the data as CSV, with output sampling rate 10 minutes, it nevertheless exported one line for every second. So in the CSV file I got one good line of data followed by 599 lines with just a timestamp and ,,,, for the data, etc. I had to edit out those blank lines. Any idea why this happens?

P.S. I have downloaded 6.1.5 now.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: CSV export includes blank lines

Post by Martyn »

From 6.1.4 onwards a table view was introduced, and csv data export is now handled through this mechanism. Previously there were issues with the conversion time and sampling of the device hardware, and the desired output sampling frequency.

Updating to 6.1.5, or 6.1.6 (which will go stable very soon) is the correct action to resolve this.
Martyn
Technical Support Manager

Post Reply