Streaming from ps9000 sampling oscilloscope

Post general discussions on using our drivers to write your own software here
Post Reply
jgpico
Newbie
Posts: 0
Joined: Thu Aug 30, 2018 4:49 pm

Streaming from ps9000 sampling oscilloscope

Post by jgpico »

Hi,

What are the options for streaming/interacting with a 9211A sampling oscilloscope? I would like to write code using the sampled data in real time, ideally in Python, but I am not sure there is a suitable API.


Best regards,
Juan

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Streaming from ps9000 sampling oscilloscope

Post by Martyn »

I would suggest emailing support@picotech.com explaining exactly what you are looking to do and what data you are expecting to retrieve from the device.
Martyn
Technical Support Manager

jgpico
Newbie
Posts: 0
Joined: Thu Aug 30, 2018 4:49 pm

Re: Streaming from ps9000 sampling oscilloscope

Post by jgpico »

Martyn wrote:I would suggest emailing support@picotech.com explaining exactly what you are looking to do and what data you are expecting to retrieve from the device.
Thank you! I've just sent an e-mail.

Out of curiosity, is there any reference to all the options for the sampling oscilloscopes? Just to know what can and cannot be done.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Streaming from ps9000 sampling oscilloscope

Post by Martyn »

In case you haven't found it here is the Programmer's Guide
Martyn
Technical Support Manager

Post Reply