Logging PT100 sensor with matlab

Which product is right for your exact requirements
Post Reply
oba
User
User
Posts: 2
Joined: Thu Aug 23, 2018 9:03 am

Logging PT100 sensor with matlab

Post by oba » Thu Aug 23, 2018 9:05 am

Hi,
I looking to purches the pt100 sensor, and maybe the data logger.
My need is to log the temperature reading into MATLAB, however i didnt saw any way of how to do this.
I would like to verify it before buying... is there any way i can get help with this?

Thanks.

Hitesh
Site Admin
Site Admin
Posts: 2846
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Logging PT100 sensor with matlab

Post by Hitesh » Fri Aug 24, 2018 1:58 pm

Hi oba,

We provide an example of how to collect data from the PT-104 data logger using MATLAB - please visit our File Exchange entry for further information and to download example code.

Hope this helps,
Hitesh

Technical Support Engineer

oba
User
User
Posts: 2
Joined: Thu Aug 23, 2018 9:03 am

Re: Logging PT100 sensor with matlab

Post by oba » Fri Aug 24, 2018 3:57 pm

Hi Hitesh,

Thanks for your answer.

I have been looking on the link and saw most of things i was looking for - the driver and matlab struct.
Also i understand i need to install the picoScope tool box?
So thanks for that! :)

I am also looking if you have a guide on how to activate the matlab class for the pt-104. I have tried to look, but have not manage to find any.

Thanks for you help,
Ori

Martyn
Site Admin
Site Admin
Posts: 3467
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Logging PT100 sensor with matlab

Post by Martyn » Tue Aug 28, 2018 10:48 am

There should have been examples there as well, if you haven't found them they are also on our GitHub Page
Martyn
Technical Support Manager

Post Reply