ADC212-50 / USB parallel

Which product is right for your exact requirements
Post Reply

ADC212-50 / USB parallel

Post by Guest » Wed Feb 20, 2008 9:02 am

I am looking for a high accuracy (> 12 bits) and minimal 50 Mhz scoop. Found the ADC212-50, however it is a parallel port version.

Would there be any limit in operation if I order this one in combination with the picotech usb to parallel port converter?



Advanced User
Advanced User
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Post by picojohn » Wed Feb 20, 2008 3:23 pm

Hello Pascal,

From our current product range, the PicoScope 3224/3424 offers 12 bit resolution and 20 MS/s single channel.

For the sample rate you require, the ADC-212/50 would be fine, and would not be performance limited by the Pico USB converter.

Note that if you require dual channel operation at maximum sample rate, then the ADC-212/100 should be considered.


Post Reply