Temp Measurements

Guest · Post by **Guest** » Sun Feb 17, 2008 6:27 am

When I set up 7 channels for measuring temperature with a TC-08 (serial)the
values displaye for room temperature vary around 400 deg C rather than the expected 25 deg C romm temperature.
Is my software corrupted?
Is my serial connection flakey?

Any help/suggestions appreciated

picojohn · Post by **picojohn** » Tue Feb 19, 2008 10:38 am

Hello Guest,

Please try uninstalling the software using the Pico uninstaller, and then install R5.18.0 (http://www.picotech.com/software.html).

Make certain that you have the correct COM port and thermocouple type selected, and that interference is not an issue.

Regards
John