Interval Triggering with 3405D

Post your LabVIEW discussions here
Post Reply
breni
Newbie
Posts: 0
Joined: Wed Aug 15, 2018 2:30 pm

Interval Triggering with 3405D

Post by breni » Wed Aug 15, 2018 3:32 pm

Hello everybody,

I'm just trying to extend the example program "PicoScope3000aExampleBlock.vi" so that triggering on an interval becomes possible.
For this I use the "Set Pulse Width Qualifier.vi".
Unfortunately, I'm not quite sure how to use this correctly.

Many thanks for your support

Hitesh
PICO STAFF
PICO STAFF
Posts: 2855
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Interval Triggering with 3405D

Post by Hitesh » Fri Aug 17, 2018 7:57 am

Hi Breni,

Have you been able to setup an Interval trigger in the PicoScope 6 software for the trigger condition that you require?

If so, please post a screenshot showing the setup and we can advise further. You will need to combine a pulse width qualifier with an advanced trigger setup so will require the appropriate sub-vi's from the PicoScope3000a.llb file.

Regards,
Hitesh

Software Dev. Engineer

Post Reply