2006 ford focus st 2.5 eng. HYDA running fault

Post discussions on projects you are working on
Post Reply
wade0059
Newbie
Posts: 0
Joined: Thu Aug 02, 2018 9:09 am

2006 ford focus st 2.5 eng. HYDA running fault

Post by wade0059 » Thu Aug 02, 2018 9:16 am

running fault, engine hunting, no response to throttle pedal, engine cuts out. if the ignition is cycled a few times the car will start and run normally.
fault code for no comms to esp module
i'm very new to the picoscope and would just like to know if the attached can h and can l readings are to be expected as i have a few spikes outside of limits (5v)
apologies for my ignorance!
many thanks
matt
Attachments
ap55bhl can.psdata
(280.14 KiB) Downloaded 51 times

Martyn
Site Admin
Site Admin
Posts: 3333
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 2006 ford focus st 2.5 eng. HYDA running fault

Post by Martyn » Thu Aug 02, 2018 10:10 am

You will need to post this request on our specialist Automotive Forum
Martyn
Technical Support Manager

wade0059
Newbie
Posts: 0
Joined: Thu Aug 02, 2018 9:09 am

Re: 2006 ford focus st 2.5 eng. HYDA running fault

Post by wade0059 » Thu Aug 02, 2018 10:03 pm

Thank you very much for letting me know

Post Reply