ADC-216?

Which product is right for your exact requirements
Post Reply
Guest

ADC-216?

Post by Guest »

Hi,
I will buy the ADC216, but I'm not sure if there is a extra probe needed to detect spectrum. If does, what type of probe is available?

User avatar
markspencer
Site Admin
Site Admin
Posts: 598
Joined: Wed May 07, 2003 9:45 am

Post by markspencer »

Hi,

There is no special probe required for the spectrum analyser.

The unit can measure bipolar voltage ±20 volts, you will need a x1/x10 probe if you are going above this voltage or an x10/x100 isolating probe if you intend to measure voltage above the low voltage directive (42.4V Peak, 30V RMS, 60V DC).

Best regards,
Regards,

Mark Spencer

Post Reply