Picoscope Generate an Alarm on a Threshold Voltage

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
cbius6
Newbie
Posts: 0
Joined: Wed Jul 11, 2018 3:50 pm

Picoscope Generate an Alarm on a Threshold Voltage

Post by cbius6 »

Goodmorning ,
In Picoscope6 with 2204A,
it is possible to generate a beep alarm if Voltage on Channel A or B goes under a desidered value ?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Picoscope Generate an Alarm on a Threshold Voltage

Post by Martyn »

Yes.
If you use Tools->Masks to create a mask around the signal and then use Tools->Alarms and select the Mask Fail you will be able to get it to Beep when the failure occurs.
Martyn
Technical Support Manager

cbius6
Newbie
Posts: 0
Joined: Wed Jul 11, 2018 3:50 pm

Re: Picoscope Generate an Alarm on a Threshold Voltage

Post by cbius6 »

perfect .
thank you.

Post Reply