SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Discussions forum for our Sampling Oscilloscopes, VNA, and Pulse Generators
Post Reply
rgarnett
Newbie
Posts: 0
Joined: Sun Jul 01, 2018 3:42 am

SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by rgarnett » Sun Jul 01, 2018 3:54 am

Hi,

I have a Tektronix TTR506A VNA (sorry about that). I recently purchased the above Cal kit, but I cannot interpret the SM000054.kit file. The Tek software uses touchstone s1P files for the cal data import. What are the various sections of the file and could I convert these to their touchstone equivalent?

Best regards

Rob
Top
Martyn
Site Admin
Site Admin
Posts: 3575
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by Martyn » Fri Jul 06, 2018 7:55 am

Can you please email support@picotech.com to discuss this
Martyn
Technical Support Manager
Top
NeilH
PICO STAFF
PICO STAFF
Posts: 88
Joined: Tue Jul 18, 2017 8:28 am

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by NeilH » Wed Jan 09, 2019 10:01 am

Hi habet222

would you be able to email support@picotech.com to discuss this
Neil
Technical Support Engineer
Top
AlexZ
Newbie
Posts: 0
Joined: Thu Mar 21, 2019 8:42 am

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by AlexZ » Thu Mar 21, 2019 8:51 am

Hello,

I have the SOLD-STD-F VNA calibration kit. The package contains besides the cal kit an USB Storage with a “SF 000270.kit” file.
Can anyone explain the file structure?
I’m using a Rohde & Schwarz VNA. How can I use the file with my VNA?


Already maild to support@picotech.com, but didn't get response.

Greetings
Alex
Top
Martyn
Site Admin
Site Admin
Posts: 3575
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SOLT-STD-M CAL KIT FILE FORMAT OF .KIT FILE

Post by Martyn » Fri Mar 22, 2019 7:24 am

You should have received an email with the requested information.
Martyn
Technical Support Manager
Top
Post Reply

Return to “RF Products”