Test and Measurement Forum

Exporting Data

Forum for discussing PicoScope (version 5)

Exporting Data

Postby Guest » Wed Nov 21, 2007 4:49 pm

I'm trying to export data from Picoscope 5.15.4, using both the copy as text and save as text options, but in either case I only get one (the first I think) of the three channels recorded output along with the timebase. I have logged on channels A B and D. Please help.
Guest
 

Postby PeterF » Thu Nov 22, 2007 12:55 pm

.TXT files for scope windows
Column 1 is the time, usually in microseconds or nanoseconds. Column 2 is the voltage, in either millivolts or volts.

If there is more than one channel, the times and voltages for channel A appear first, then the times and voltages for channel B appear below, and so on. This is because readings for different channels may be collected at different times.

The same format is used when pasting scope data on the clipboard.

It would also be a good idea to upgrade to the latest version of PicoScope5, (R5.18.0), from the download page.
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire


Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests