What probe/test lead do need to purchase?

Which product is right for your exact requirements
Post Reply
Technoman64
User
User
Posts: 5
Joined: Thu Oct 11, 2007 4:02 am

What probe/test lead do need to purchase?

Post by Technoman64 »

I need to test the primary voltage output of custom ignitions I build for racing applications. The voltage present on the primary side of the ignition coil is 1,400 volts AC with a max of 900volts positive swing and 600 volts negative swing.

Do you have a 50/1 or 100/1 high impedance probe that will work for my application?

I am able to watch the secondary side with the adaptors provided in the kit. I have circuitry that monitors the coil saturation current in real time and makes adjustments accroding to battery voltage, temp of the coil(resistance increases with temp), and it also detects coil saturation. This allows me to extract the maximum energy from the ignition system and to maintain this energy without variation. I have been using a Fluke scopemeter but prefer to use the Pico Scope to insure the controllers are functioning correctly before sending to my customers. I like the idea of having a print out of the actual test values for the customer also.

I have the 4-channel Automotive kit.

I also need 2 coil on plug adaptors. I have figured out what I need to order for these though.

Thanks for your time.

Technoman64
User
User
Posts: 5
Joined: Thu Oct 11, 2007 4:02 am

Post by Technoman64 »

What do you think of this high voltage x100 probe?

http://www.testpath.com/Items/High-Volt ... 10-451.htm

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

Probes

Post by Autonerdz »

Technoman,

Pico has this Differential oscilloscope probe X10/X100 near the bottom of this page:

http://accessories.picotech.com/oscillo ... robes.html

We recommend this for our guys that do direct testing of Hybrid high voltage controls.

Tom Roberts
(The Picotologist)
http://www.autonerdz.com
THE PicoScope Automotive Authority
In North America
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

Technoman64
User
User
Posts: 5
Joined: Thu Oct 11, 2007 4:02 am

Post by Technoman64 »

My application will exceed the DC Voltage rating of the probe you suggest. Still OK to use?

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

probes

Post by Autonerdz »

Technoman,

Yeah, but That's the closest thing that Pico has that I know of. 1000v rms cat III. This is also differential isolating. Maybe your other choice would be more suitable. Unless someone at Pico has something to add...

Are those high voltages you mention just the inductive kicks?
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

Technoman64
User
User
Posts: 5
Joined: Thu Oct 11, 2007 4:02 am

Post by Technoman64 »

The peak voltages are from the primary field colapsing when the IGBT is turned off to the coil to produce the ignition spark. I use 1,200 volt IGBT's to drive the igntion coils. The higher the cylinder pressure the higher the voltage produced, there is a clamp at +/-880 volts to protect the IGBT's in the event of a sparkplug wire coming off, plug fouling, etc...

I use a special ignition coil that can withstand the high voltages induced by the drive circuitry. When I turn the system up to maxium energy I can throw a 5" spark in open air up to 20,000 RPM :)

It is crucial that I test new units, I am hoping to eventually write some custom software to detect out of spec readings and produce an alert. Or is there software available that I can download and use with the 4-channel Automotive scope to do this now? I would also like to have a prgram that can calculate actual ignition timing and display in numeric form real time. Is there an example project in C++ for the Automotive Scope?

I downloaded the sample projects for the 4-Channel non-automotive scope and was able to succesfuly compile and run the code. It did find the device and I was able to retrieve data, there were issues with communication though. Maybe it is just something I over looked.

Technoman64
User
User
Posts: 5
Joined: Thu Oct 11, 2007 4:02 am

Post by Technoman64 »

Oops, posted same message twice... So I edited this one.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko »

Hi and thank you for your post.

Have you got the latest driver for the automotive scopes as it has only been recently that we allowed you to write software for it.

Kind regards
Ziko

Technical Specialist

Post Reply