collect part of stream data each cycle at high sampling rate

Post your LabVIEW discussions here
Post Reply
Liu
Newbie
Posts: 0
Joined: Thu Jun 28, 2018 3:48 pm

collect part of stream data each cycle at high sampling rate

Post by Liu »

I am a user of Pico6404 D. Currently I want to collect 3 channels of data at 100 MS/s for each channel under stream mode for a few minutes. I understand the data would be too large to transfer and process, but I only need 500 samples every 50 micro seconds.

I am thinking about using signal generator to generate 20 KHz pulse signal and send to AUX port for trigger. I want to run the program under stream mode (I don't want gap) and collect 500 samples after each trigger, lasting for a few minutes. Do you think it is possible?

I am current using LabVIEW for the script. If possible, give me some hint or example on how to realize this.

Thanks in advance!

Liu

AndrewA
PICO STAFF
PICO STAFF
Posts: 400
Joined: Tue Oct 21, 2014 3:07 pm

Re: collect part of stream data each cycle at high sampling

Post by AndrewA »

Please see my rely here-
posting.php?mode=reply&f=20&t=37321

Regards Andrew Abbott
Technical Specialist
Regards Andrew
Technical Specialist

Post Reply