100 samples/s with ADC-11 and Labview

Post your LabVIEW discussions here
Post Reply
Jabo
Newbie
Posts: 1
Joined: Fri Oct 26, 2007 2:39 pm

100 samples/s with ADC-11 and Labview

Post by Jabo » Mon Oct 29, 2007 10:55 am

Hi everybody!!!

Can somebody help me to develop a programme with LabVIEW in order to take 100 samples/second with a ADC-11 USB??

Thanks in advance
ADC-11 USB and TC-08 USB user.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Thu Nov 29, 2007 10:48 am

Hi the technical reference in the user manual should give you a helping hand to start programming, you may also wish to look at some of the programming examples to give you an idea of how the functions interact and the methodology.

You can find the technical reference

http://www.picotech.com/document/pdf/adc11-en.pdf using port 101 for USB devices

The programming examples are installed by default in the following location:

c:\Program Files\Pico Technology\Pico Full\Examples

Hope this helps.

Kind regards
Ziko

Technical Specialist

Post Reply