Audio filter test & measurement with the 2204A - PART 2

Post discussions on applications you are writing
Post Reply
Glovisol
Advanced User
Advanced User
Posts: 0
Joined: Sat May 11, 2013 10:03 am
Location: San Marzano Oliveto, Asti, Italy

Audio filter test & measurement with the 2204A - PART 2

Post by Glovisol »

Calculated composite filter response
Calculated composite filter response
Audio filter test & measurement with Picoscope & 2204A – PART 2

Noise Generator output, as seen on the 2204A scope, is shown in Figure 1. Same output, as seen on the 2204A Spectrum Analyser is shown in Figure 2, showing Wideband Noise to 97 KHz. This and all other PC screen photos to be posted were obtained with the following settings of the FFT options:
-Window Functions: Gauss.
- Y axis: Average.
- Log unit: dBm/600 Ohm

The Average function of course slows down the measurement process, but provides a very neat display. Also uploaded is the calculated response of the filters to be tested.
Attachments
Figure 1 - Wideband noise as seen on the Scope
Figure 1 - Wideband noise as seen on the Scope
Figure 2 -Wideband noise to 97 KHz as seen on the Spectrum Analyser
Figure 2 -Wideband noise to 97 KHz as seen on the Spectrum Analyser

Post Reply