Using tPS6000TriggerInfo

Post your LabVIEW discussions here
Post Reply
famunoz2705
Newbie
Posts: 0
Joined: Tue Jun 12, 2018 6:21 am

Using tPS6000TriggerInfo

Post by famunoz2705 » Tue Jun 12, 2018 6:41 am

Hi,

I am working with the PicoScope 6404C in Labview and I am using the rapid block in order to measure a bunch of fast transient pulses. In the Labview application, I need to get the time at the trigger occurs for every single pulse. I read that the typedef struct tPS6000TriggerInfo provides that information. I am a little bit confused because I don't know how I can implement this function in my Labview program.
I really appreciate some advice.

Best regards,

Fabio.
Delft University of Technology.

Hitesh
PICO STAFF
PICO STAFF
Posts: 2855
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Using tPS6000TriggerInfo

Post by Hitesh » Tue Jun 12, 2018 9:11 am

Hello Fabio,

Could you please e-mail support@picotech.com in order to discuss this further?

Regards,
Hitesh

Software Dev. Engineer

Post Reply