Test and Measurement Forum

input BW-limit filter accessories

Post discussions on projects you are working on

input BW-limit filter accessories

Postby packo » Thu Jun 07, 2018 2:15 pm


Could you recommend any (feed-through?) filters (e.g. 200KHz or 1MHz) for limiting the bandwidth at the oscilloscope input?

They would be very useful for further increasing the ENOB (by decreasing the noise) in 2000 series (2206B) and also 5000 (5242D) series oscilloscopes when sampling low frequency e.g. audio signals.

Also could you please offer hints on what other accessories I would need for matching the oscilloscope probes to the filter and the filter to the oscilloscope ? (e.g. PROBE -> BW limit filter -> feed-through 50Ohm terminator? -> OSCILLOSCOPE IN(HighZ)).

Thank you!
Posts: 6
Joined: Wed Aug 09, 2017 9:59 pm

Re: input BW-limit filter accessories

Postby Martyn » Mon Jun 11, 2018 6:29 am

If you can email support@picotech.com regarding the questions you are asking across different topics we will be able to give you a full answer to enable you to make an informed choice on scope and accessories.
Technical Support Manager
Site Admin
Site Admin
Posts: 3113
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to Projects

Who is online

Users browsing this forum: No registered users and 0 guests