Test and Measurement Forum


Having problems ? let us know the details here


Postby Guest » Fri Oct 12, 2007 4:46 pm

I have found that setting the trigger threshold too high also hangs the computer. The suggestion of clicking "Stop" and then hitting F9 or F10 is not practical as the cursor cannot move.

Control/Alt/Delete also would not work, and I found it necessary to press the computer Reset button and undergo a slow, painful re-boot.

Is there anything I have missed?

New ASDC42 User

Postby picojohn » Fri Oct 19, 2007 1:29 pm

Hello Guest,

I am able to recreate the lock-up with an ADC-42 and PicoScope R5.17.1.
The lock-up seems to occur as the trigger level reaches the peak signal level, which is not typically done in practice.

What is the specification of your PC and which PicoScope version are you using, as I am unable to recreate the PC lock-up problem that you have reported.

Zen Master
Zen Master
Posts: 382
Joined: Mon Jun 11, 2007 1:10 pm

Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests