Test and Measurement Forum

About measure AD plus DC signals.

Having problems ? let us know the details here

About measure AD plus DC signals.

Postby alkime » Sun Oct 07, 2007 2:52 pm

Hello.
I need to measure a signal composed of AD voltage an DC voltage.
I can't measure this signal (5 vol DC plus 1,65 v. AC.)
Is it possible?

Best regards.
Juan Jose Navarro.
alkime
Active User
Active User
 
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm

My last Post is for picoscope 2105

Postby alkime » Sun Oct 07, 2007 2:59 pm

My last Post is for picoscope 2105
Best Regards.
Juan Jose Navarro.
alkime
Active User
Active User
 
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm

Postby PeterF » Mon Oct 08, 2007 2:21 pm

Hi,
There is no reason why you cannot measure a mixed AC/DC signal. Just make sure you are set to DC on that channel and you adjust the trigger level to suit to get a stable picture. Set to AC if you just wish to see the AC part of the signal. What frequency is the AC component? Can you not trigger? What voltage range are you using?
Regards,
PeterF.
PeterF
Zen Master
Zen Master
 
Posts: 435
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests