PicoScope 7 Software
Available on Windows, Mac and Linux
PP218 ac/dc currant clamp
-
Guest
PP218 ac/dc currant clamp
hi
I would like to know if this unit (PP218 currant clamp)
will work on my snapon. scope it has 4mm. bannana sockets
so I know it will fil the sockets but will it work?
I would like to know if this unit (PP218 currant clamp)
will work on my snapon. scope it has 4mm. bannana sockets
so I know it will fil the sockets but will it work?
-
Autonerdz
- Advanced User
- Posts: 141
- Joined: Wed Nov 20, 2002 4:19 pm
- Location: Washington State USA
- Contact:
Current Clamp
Yes, it will work. It will work with any lab scope. The 100mv/A and 10mv/A settings are the same as the Snap-On amp probe but it goes to 60A in the high range instead of 40A.
You would be better off choosing the PP264 and getting a BNC to banana plug adapter though. The PP264 has superior shielding and will provide better RFI rejection. The case is nickel shielded and it has a shielded BNC lead.
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
THE PicoScope Automotive Authority
In North America
You would be better off choosing the PP264 and getting a BNC to banana plug adapter though. The PP264 has superior shielding and will provide better RFI rejection. The case is nickel shielded and it has a shielded BNC lead.
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
THE PicoScope Automotive Authority
In North America
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America