Test and Measurement Forum

About the installation of the "hook" of the probe

Having problems ? let us know the details here

About the installation of the "hook" of the probe

Postby alkime » Tue Sep 11, 2007 7:44 pm

in the pico scope 2105.
There are small devices included .
I need some picture to see how to install the hook.
bes regards
alkime
Active User
Active User
 
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm

Postby ziko » Wed Sep 12, 2007 11:08 am

Hi I have attached two pictures, one showing before the connection and one showing after.

Hope this helps.

Kind regards
Attachments
point of placement.JPG
point of placement.JPG (17.64 KiB) Viewed 2344 times
After.JPG
After.JPG (16.32 KiB) Viewed 2333 times
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

My problem is the black piece.

Postby alkime » Wed Sep 12, 2007 5:28 pm

Of the picture
and the silvered piece so.

now can I connect in the yellow conector or the PicoScope?
best regards
juan jose navarro.
Attachments
IMG_0116.JPG
IMG_0116.JPG (55.78 KiB) Viewed 2329 times
alkime
Active User
Active User
 
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm

Postby ziko » Thu Sep 13, 2007 11:43 am

The yellow plastic is there as protection when you are not using the scope. To connect other "hook" you must remove the yellow cover and insert the "hook"

Hope this helps.

Kind regards
Ziko

Technical Specialist
ziko
Zen Master
Zen Master
 
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Ok, ok

Postby alkime » Fri Sep 14, 2007 10:10 pm

Thanks for all.

Best regards.
Juan Jose Navarro
alkime
Active User
Active User
 
Posts: 5
Joined: Tue Sep 11, 2007 6:45 pm


Return to Getting Started

Who is online

Users browsing this forum: No registered users and 0 guests