Low voltage range - Overvoltage

Post any questions you may have about our current range of oscilloscopes
Post Reply
bendzo
Newbie
Posts: 0
Joined: Fri Apr 27, 2018 12:28 pm

Low voltage range - Overvoltage

Post by bendzo » Fri Apr 27, 2018 12:39 pm

Hi,
I'm using PicoScope and current probe with "open" alarm (signalizing that current probe is not locked), current probe amplifier output is around 1V during the alarm.

My question is, if it's safe to use lower ranges (+-200mV or even +-20mV) when actual input signal may reach 1V?

Thank you!
Jacob

Martyn
Site Admin
Site Admin
Posts: 3372
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Low voltage range - Overvoltage

Post by Martyn » Fri Apr 27, 2018 12:56 pm

That will be fine.
Martyn
Technical Support Manager

bendzo
Newbie
Posts: 0
Joined: Fri Apr 27, 2018 12:28 pm

Re: Low voltage range - Overvoltage

Post by bendzo » Fri Apr 27, 2018 1:52 pm

Great! Thank you!

Post Reply