Test and Measurement Forum

help with an ADC10 and Labview8.2

Post your LabVIEW discussions here

help with an ADC10 and Labview8.2

Postby iz3dmq_luca » Sun Aug 26, 2007 11:14 pm

i 'm using an ADC10 LPT device , normally, with pico softwares.
i woul like to start to learn something about the use of this transducer with labview 8.2
i'm finding a gentleman that helps me to understand like interface the adc10 with a labview and if i need some particular drivers to work.

to start my experience i would like to duplicate a easy chart recorder for a temperature probe that i'm just using with pico-log-recorder who gives me a 0-5 vdc signal from 0 to 100 Celsius degrees .
someone can help me?
mny tks
Posts: 1
Joined: Sun Aug 26, 2007 11:03 pm

Postby gruntman » Wed Sep 19, 2007 6:49 pm


The attached example will allow you to use the ADC-10 to log your temperature probe between 0-100C. If you have any questions feel free to ask...


Richard Boyd
Crag Technologies, Inc
ADC-10 Labview 8.2 converted to measure between 0-100 C
(13.89 KiB) Downloaded 310 times
Posts: 109
Joined: Thu Sep 28, 2006 3:50 pm

Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests