PicoLog 6 alarms

Forum for discussing PicoLog
Post Reply
qenvstevenzxr
Newbie
Posts: 0
Joined: Tue Mar 20, 2018 8:31 am

PicoLog 6 alarms

Post by qenvstevenzxr » Tue Mar 20, 2018 8:36 am

Hi,

I like the PicoLog 6 software. I see many improvements have been made. One issue I have been having is with the alarm functionality.

When using an ADC-24, the alarm digital output does not physically go high when configured. I see there is very little documentation on the alarms. What could be the reason for this?

For using the "Run application" feature of the alarms, a directory is the only option. There is no information relating to the actual executable file to run. What should the name of the executable be in the specified directory?

Thanks in advance for your help.

Hitesh
Site Admin
Site Admin
Posts: 2829
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: PicoLog 6 alarms

Post by Hitesh » Tue Mar 20, 2018 1:35 pm

Hi qenvstevenzxr,

I am in the process of investigating this and hope to provide an update later.

Which digital output is being set and are any configured as inputs?

For the Alarm, how have you specified the name for the executable?

Update: The issue with being unable to select the executable is a bug and has been logged.

Regards,
Hitesh

Technical Support Engineer

Post Reply