FlexRay serial decoding

Post any questions you may have about our current range of oscilloscopes
Post Reply
lowpy
Newbie
Posts: 0
Joined: Sat Mar 17, 2018 1:29 pm

FlexRay serial decoding

Post by lowpy »

I am having problems setting up serial decoding for FlexRay on a Picoscope 5444B.
When activating the decoder it seems to identify the threshold correctly but not the baudrate (which in my case is 10Mbit/s). Even if I manually select the correct baudrate the decoding does not work. Only a fraction of the header is decoded and even that seems to be incorrect.
I'm using one of the two FlexRay lines as a source for the decoder.

If someone has any advice on making this work it would be greatly appreciated.
Thanks in advance!

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: FlexRay serial decoding

Post by Martyn »

Can you post a psdata file so that we can take a look.
Martyn
Technical Support Manager

Post Reply