USB Transfer type

Post general discussions on using our drivers to write your own software here
Post Reply
Sleuth
User
User
Posts: 2
Joined: Fri Apr 06, 2007 7:55 pm
Location: kOKOMO

USB Transfer type

Post by Sleuth » Tue Jun 26, 2007 10:02 pm

Does anyone know what transfer type(If it is a valid documented type ) that pico use`s with there 3000 series scopes?
Control
Bulk
intercept
isochronous or whatever?
Regards,
Dave

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Wed Jun 27, 2007 11:11 am

Hi and thank you for you post.

The 3000 uses bulk mode, is there any particular reason you wish to know this as the driver deals with all of this?

Kind regards
Ziko

Technical Specialist

Sleuth
User
User
Posts: 2
Joined: Fri Apr 06, 2007 7:55 pm
Location: kOKOMO

Bulk mode

Post by Sleuth » Wed Jun 27, 2007 2:08 pm

Hey Ziko,
Thanks for your prompt reply.
I am seeking info on how you guys transmit(protocol) the info from scope to pc. I have had conversations with the support team( live call) and was told they would respond via an e-mail...never happened.(about 3 -4 weeks ago)
I believe you have answered my question(bulk mode being an industry standard protocol for usb transfer) Please correct me if I am wrong.
Kind regards,
Dave

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Thu Jun 28, 2007 9:35 am

Hi,

Sorry to hear that you had no response before, yes it is using the industry standard bulk mode.

Kind regards
Ziko

Technical Specialist

Post Reply