Test and Measurement Forum

PS 5000 SDK Now available

Forum for discussing PicoScope version 6 (non-automotive version)

PS 5000 SDK Now available

Postby davidj » Thu Jun 21, 2007 4:05 pm

Please go to http://www.picotech.com/software.html, select a PS5000 and download the Development Kit.

The SDK allows you to write your own software or interface to popular third party software packages. The drivers support data streaming functionality, where gap-free continuous data can be streamed via the USB 2.0 port directly to the PC’s RAM or hard disk drive at up to 6 MS/s.
Regards,
David
davidj
Site Admin
Site Admin
 
Posts: 43
Joined: Wed Oct 11, 2006 8:50 am
Location: St. Neots, Cambs, UK

PS5000Con.c

Postby peter_jan » Mon Jun 25, 2007 2:28 am

Hi,

Thanks for the download, attached are some changes to make it compile with BCC5.6

Once I managed to get it to compile with the attached changes it will not capture any data, and the picoScope will not trigger. I'm using a picoScope 5204 on windows 2000 and I tried also windows XP.

Running picoscope 6.0.9 on the same machine triggers ok and displays the waveform I expect.

Any ideas?
Attachments
ps5000con.diff.c
Diff file
(5.43 KiB) Downloaded 309 times
PS5000con.c
Modified source
(29.18 KiB) Downloaded 364 times
Peter Jansen
peter_jan
User
User
 
Posts: 3
Joined: Wed May 30, 2007 6:54 am


Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 0 guests