frequency measurement resolution

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Thu May 22, 2014 7:04 am

frequency measurement resolution

Post by OldIron » Tue Feb 27, 2018 5:02 pm


I have recently purchased PicoScope 5242B. Its 60 MHz bandwidth is quite reasonable for my measurements.

Definitely very useful scope and function-rich software working in tandem.

However, I’m not quite happy with the frequency resolution of the frequency measurement with Picoscope 6 (PS6) (v.

I tested the resolution of the frequency measurement of the PC oscilloscope, using external DDS-based signal generator, and frequency counter, both with 0.1 Hz resolution.
PS6 settings: fs = 1MHz, 1Msamples, 1÷10 ms/div (doesn’t matter), whole trace measurement.
I used signal with frequency: 1001.0Hz, 1001.1Hz, 1001.2Hz, ... 1001.4Hz.
The external instruments showed these values, however PS6 always displayed 1001Hz in the frequency measurement line.
I expected, that having processed a million of samples, PS6 would have given better frequency resolution.

I would appreciate any comments on my results and following questions:
- Does the PS6 software measure frequency with 4-digit resolution (or measures more
precisely, but rounds the result to 4 digits, as in the internal signal generator frequency)?
- Is there any software-defined difference in the frequency measurement resolution
of various scopes of the 5000 series?

Old Iron

Site Admin
Site Admin
Posts: 190
Joined: Thu May 25, 2006 8:02 am

Re: frequency measurement resolution

Post by alan » Tue Feb 27, 2018 8:10 pm


Try the DeepMeasure feature - it displays to more significant digits. ... eepmeasure

Site Admin
Site Admin
Posts: 3799
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: frequency measurement resolution

Post by Martyn » Wed Feb 28, 2018 10:27 am

Deep Measure is available in PicoScope 6.13.2. Beta
Technical Support Manager

Post Reply