How to read out which range is set?

Post your LabVIEW discussions here
Post Reply
mikaellindgren
Newbie
Posts: 0
Joined: Fri Jan 26, 2018 4:35 pm

How to read out which range is set?

Post by mikaellindgren » Wed Feb 14, 2018 4:44 pm

Is there a way to read out what the current range setting is?

Gerry
PICO STAFF
PICO STAFF
Posts: 281
Joined: Mon Aug 11, 2014 11:14 am

Re: How to read out which range is set?

Post by Gerry » Thu Feb 15, 2018 12:15 pm

Hi mikaellindgren,

What do you mean by 'range' setting (which Range?), and by 'read out' do you mean display, print or save to a file?

Regards,

Gerry
Gerry
Technical Specialist

Martyn
Site Admin
Site Admin
Posts: 3345
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: How to read out which range is set?

Post by Martyn » Thu Feb 15, 2018 2:34 pm

There is no call to read back the current range, but as your program will have set the range in the first place, you should know this value. That is what the PicoScope 6 application does when the range is set to auto.
Martyn
Technical Support Manager

Post Reply