TC-08 constant reference point

Forum for discussing PicoLog
Post Reply
Guest

TC-08 constant reference point

Post by Guest » Sat May 26, 2007 2:11 am

Hi,

1) I have a TC-08 and I am measuring 4 temperatures against a target temp, the target temperature is 134 deg C, is there an easy way to get a constant line of 134 deg C on the graph? I have a spare chanel which I could use? Any sugestions would be helpfull.

2) The work shop I am in often gets cold in winter and I have been told that the TC-08 will be affected by varing abient temperatures is this true? in Winter the ambient temp in the work shop could get as low as 10 deg C?

Thanks

Phill

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Tue May 29, 2007 2:12 pm

Hi and thank you for your post.

1) There is no direct way to do this.

2) The quoted accuracies are when the USBTC08 is between 20-30degC so the measurements will not match what we quote outside this range.

Kind regards
Ziko

Technical Specialist

Post Reply