Rolling Graph

Which product is right for your exact requirements
Post Reply
Guest

Rolling Graph

Post by Guest » Thu May 17, 2007 2:54 pm

Does the picoscope software behave like a real osci with a rolling graph for sample rates the USB can deal with?

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Fri May 18, 2007 3:11 pm

Hi and thank you for your post.


Could you explain further your question, what kind of frequency are you talking about ?

Kind regards
Ziko

Technical Specialist

Guest

Post by Guest » Fri May 18, 2007 10:04 pm

ziko wrote:Hi and thank you for your post.

Could you explain further your question, what kind of frequency are you talking about ?

Kind regards
I would like to see something on the screen right after the trigger and don't want to wait until the memory is full - as like on a real scope. My sampling rates are about 1-100kHz (or even less). I read that Cleverscope does not support this, so I was wondering if any usb osci is able.

ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Post by ziko » Mon May 21, 2007 12:33 pm

Hi currently the only product this can be achieved with is the 5000 series scopes as in PicoScope 6 it supports fast streaming.

In all our other products they use PicoScope 5 which on time bases of 200ms or slower operate in standard streaming mode, which is 1kS/s. In terms of hardware the 3224, 3223, 3424 and 3423 are the only other products that can support fast streaming, however to use this functionality you would have to write your own software.

Hope this helps.

Kind regards
Ziko

Technical Specialist

Post Reply