Test and Measurement Forum

Triggering in changing amplitude

Forum for discussing PicoScope (version 5)

Triggering in changing amplitude

Postby NaingScorpio » Tue May 08, 2007 1:40 am

Hi admin,

Sorry for my last post with uncompleted question.
My waveform is normally AC line voltage and with Bule color waveform in my picture. Its value is 310Cosωt, say. I would like set trigger on Amplitude of waveform so that the changed wavefrom will be captured when my wavefrom is decreased (300Cosωt) or increased (320Cosωt). How can I set the trigger by using built-in triggering? Or how can I modified the trigger if I need to create own trigger by using source code?
Any picoscope or ADC logger can be used to accomplish this feature.

Thanks for your time and consideration.

Best Regards,
(41.25 KiB) Downloaded 590 times
(37.84 KiB) Downloaded 590 times
Active User
Active User
Posts: 8
Joined: Tue Feb 27, 2007 9:41 am

Postby ziko » Thu May 10, 2007 9:20 am

Hi, and thank you for your post.

This feature is not available on any of our products, the 5000 scopes uses PicoScope6 which has advanced triggering, however this scenario is not available, there will be more additions to the advanced triggering although I cannot say if this one will feature in it.

Kind regards

Technical Specialist
Zen Master
Zen Master
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Return to PicoScope 5

Who is online

Users browsing this forum: No registered users and 0 guests